SINCE 1950 THE CORPORATE GOAL HAS BEEN

INNOVATION

Based on great design capability
and ability to respond to the increasing
needs of customers and markets.

saronni
world

SARONNI WORLD
MORE THAN 70 YEARS OF EXPERIENCE

More than 70 years of business with the constant goal of satisfying our customers, often anticipating their requirements, with innovative solutions and always ready to resolve their increasingly complex production problems.
innovation

SARONNI WORLD
MORE THAN 70 YEARS OF INNOVATION

It is since ever the company goal based on great design capability and ability to respond to the increasing needs of customers and markets.
experience

SARONNI WORLD
MORE THAN 70 YEARS OF CONTINUOUS GROWTH AND SUCCESS

-4.500 feeding lines set up all over the world
- hundreds of active customers
- exports to 20 countries
- 5% invested in research and innovation
R&D

R&D
RESEARCH AND DEVELOPMENT A WHOLLY DEDICATED TEAM

A research and development team of 20 project technicians is dedicated to the mechanical, hydraulic and software design of all of our machinery, which is then project managed and assembled inside our modern production department. A choice that allows us to control the whole production process and to guarantee quality and efficiency to our customers.
marketing

CAREFUL OBSERVERS, FLEXIBLE MANUFACTURERS
WE ARE IN THE MARKET TO SERVE THE MARKET

A statement which may sound obvious, but in reality, this involves continuous analysis of customers’ needs and of the constantly evolving world sector, as well as a strong ability to adapt and propose solutions in line with such market changes. An open-minded attitude and 360° vision, allow us to work in partnership with the world’s most important automotive manufacturers, and maintain a position of leadership in a crowded sector such as stamping and coil processing.
assistance

PARTNERSHIP WITH TRUST

Partnership, before and after sales assistance, and innovative solutions are at the core of our mission, with the aim of complete customer satisfaction. Our success in this objective is confirmed by the loyalty of our customers who regularly return to ask for our products. In fact, we can boast some clients with more than 60 installed lines and many others with 20 to 25 lines supplied by us.

timeline

OUR HISTORY

1950

The Saronni brothers found
the Saronni company

1963

Realizzazione prima linea
alimentazione compatta
(senza ansa).

1978

Prototype of power supply electronic
with engine electro-hydraulic.

1986

First line of
feeding
with regulation
automatic managed
by PLC

1994

Commercial launch
of head/tail jumper
ribbon for crafting
front/back

1996

Construction first
SUPERCOIL
in response
to needs
of coil change

2002

First system with
coil loading and
tape feed
fully
automatic

2007

System design
flexible able
to feed both moulds
transfer and moulds
step by step
programmable
from control panel

2010

New interactive software
for automatic adjustment
straightening parameters

2011

SYNCRONAMIX:
new software for the
management of the loop in
function of the material
and the feeding speed

2012

New series of
straighteners for
high strength material.

2013

First line of
feed
fully
automatic for
tape width
2,150mm.

2015

Expansion
of the range with
type
R70 straighteners for strips
up to 18mm thick.

2017

"Turnkey" supply of
combined line for
feeding
both from coils and formats.

2019

The already famous high-precision
straightening machines
dedicated to magnetic
metal are renewed
both in terms of completeness and aesthetics

2020

Further supply of automatic
cutting and
stacking cell in
special
aluminum alloys dedicated to the
production of components for
"full electric" cars

2021

The production of
disc cutters begins on
technology acquired from "Elma" to
completion of the
automatic lines
for cutting discs

2023

Plug and play and reduction
of the overall dimensions on the ground
are some of the goals
achieved in 2023.

THE NEXT STEP
TO THE FUTURE

1950

The Saronni brothers found the Saronni company

First feeding line with automatic regulation controlled by a PLC.

1986
1963

First compact feeding line (without loop).

1978

Prototype of electronic feeder with electro-hydraulic motor.

First SUPERCOIL for continuous feeding.

1996

Development of a flexible system able to feed progressive and transfer dies with options programmed via a control panel.

2007
1994

Commercial launch of welded coil ends for continuous processing.

2002

First line with completely automatic coil loading and strip head introduction.

SYNCRONAMICS: new software for loop control relative to the material type and the feeding speed.

2011

First completely automatic feeding line for strips 2.150mm wide.

2013
2010

New interactive software for automatic adjustment of the straightening parameters.

2012

New straightener range for high-strength material.

“Turnkey” supply of a combined line for feeding from both coil and blanks.

2017

Further supply of automatic cutting and stacking cell for special aluminum alloys blanks dedicated to the production of components for "full electric" cars

2020
2015

Range extension with the new R70 type straightener for strips up to 18mm thickness.

2019

The already famous high precision straighteners, dedicated to the magnetic strip, are renewed both for completeness and aesthetics

Plug and play and reduction of the overall dimensions on the ground are some of the goals achieved in 2023.

2023
2021

Start of the production of disc-cutting machines on “Elma” technology and know-how to complete the automatic lines for disc cutting

THE NEXT STEP TO THE FUTURE

1950

The Saronni brothers found the Saronni company

1963

First compact feeding line (without loop).

1978

Prototype of electronic feeder with electro-hydraulic motor.

1986

First feeding line with automatic regulation controlled by a PLC.

1994

Commercial launch of welded coil ends for continuous processing.

1996

First SUPERCOIL for continuous feeding.

2002

First line with completely automatic coil loading and strip head introduction.

2007

Development of a flexible system able to feed progressive and transfer dies with options programmed via a control panel.

2010

New interactive software for automatic adjustment of the straightening parameters.

2011

SYNCRONAMICS: new software for loop control relative to the material type and the feeding speed.

2012

New straightener range for high-strength material.

2013

First completely automatic feeding line for strips 2.150mm wide.

2015

Range extension with the new R70 type straightener for strips up to 18mm thickness.

2017

“Turnkey” supply of a combined line for feeding from both coil and blanks.

2019

The already famous high precision straighteners, dedicated to the magnetic strip, are renewed both for completeness and aesthetics

2020

Further supply of automatic cutting and stacking cell for special aluminum alloys blanks dedicated to the production of components for "full electric" cars

2021

Start of the production of disc-cutting machines on “Elma” technology and know-how to complete the automatic lines for disc cutting

2023

Plug and play and reduction of the overall dimensions on the ground are some of the goals achieved in 2023.

THE NEXT STEP TO THE FUTURE

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.