CASE HISTORY /

Feeding line with loop for 3.600 Ton press

Feeding line with loop for 3.600 Ton press

Customer goals: An extremely flexible line to feed progressive and transfer dies with a wide range of leveling capacities.

This line supplied to one of the most important TIER1 in the automotive sector, combined with a 3,600 ton transfer press, in addition to feeding the press in the conventional way, i.e. from coils, also allows the customer to directly feed blanks from a double destacker and this operational choice can be made through a simple selection from the control panel.

The line is equipped with a leveler with automatic roll pack change to process a wide range of thicknesses while maintaining high leveling standards; in fact, the line must process thicknesses from 0.7mm to 8.0mm. This line is also equipped with our ALU Package which allows to process aluminum, maintaining its aesthetic properties unaltered.

WIDTH

1800 mm

MAXIMUM THICKNESS

8 mm

YIELD STRENGTH

Re 1200 N/mm2

COIL WEIGHT

25000 Kg

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.